Series representative image — not a model-specific photograph.
OMRON / MODEL
NX-SOH200
NX I/O SystemOMRON NX-SOH200 — Unit Type: Safety Output Unit; Product Configuration: Safety Output Unit; I/O Points / Channels: 2 points.
- Unit Type
- Safety Output Unit
- Product Configuration
- Safety Output Unit
- I/O Points / Channels
- 2 points
- I/O Common / Polarity
- Sourcing outputs (PNP)
Overview
Safety Output Unit. Safety application suitability and applicable standards require model-specific manufacturer confirmation; no SIL/PL or certification rating is inferred. Refer to the complete ordering code and applicable conditions. This catalogue is for selection, not an operating manual.
Specifications
| Unit Type | Safety Output Unit |
|---|---|
| Product Configuration | Safety Output Unit |
| I/O Points / Channels | 2 points |
| I/O Common / Polarity | Sourcing outputs (PNP) |
| Maximum Load Current | 2.0 A/point, 4.0 A/Unit at 40°C, and 2.5 A/Unit at 55°C The maximum load current depends on the installation orientation and ambient temperature.2.0 A/point; 4.0 A/Unit at 40 C and 2.5 A/Unit at 55 C. Depends on installation orientation and ambient temperature. |
| Rated I/O Voltage | 24 VDC |
| Safety Slave Connections | 1 |
| I/O Refreshing Method | Free-Run refreshing |
| Catalogue Unit Version | Ver.1.0 |
| Compatibility / Requirements | Connect to an NX1P2 CPU Unit through an EtherCAT Coupler Unit, as stated in this catalogue. |
| Signal / Interface | Sourcing outputs (PNP) |
Document
PDFomron-nx-series-catalog-en.pdfOMRON NX-series I/O System Catalog - English (R183-E1-20, 0326) · Shared series documentRequest this model
Send the exact ordering code, quantity or product list.