Series representative image — not a model-specific photograph.
OMRON / MODEL
NX-ID5142-1
NX I/O SystemOMRON NX-ID5142-1 — Unit Type: Digital Input Unit; Connection Type: M3 screw terminal block; Product Configuration: DC Input Unit (M3 Screw Terminal Block, 30 mm Width).
- Unit Type
- Digital Input Unit
- Connection Type
- M3 screw terminal block
- Product Configuration
- DC Input Unit (M3 Screw Terminal Block, 30 mm Width)
- I/O Points / Channels
- 16 points
Overview
Digital Input Unit. Refer to the complete ordering code and applicable conditions. This catalogue is for selection, not an operating manual.
Specifications
| Unit Type | Digital Input Unit |
|---|---|
| Connection Type | M3 screw terminal block |
| Product Configuration | DC Input Unit (M3 Screw Terminal Block, 30 mm Width) |
| I/O Points / Channels | 16 points |
| I/O Common / Polarity | For both NPN/PNP |
| Rated Input Voltage | 24 VDC |
| I/O Refreshing Method | Switching Synchronous I/O refreshing and Free-Run refreshing |
| ON / OFF Response Time | 20 μs max./400 μs max. |
| Signal / Interface | For both NPN/PNP |
Document
PDFomron-nx-series-catalog-en.pdfOMRON NX-series I/O System Catalog - English (R183-E1-20, 0326) · Shared series documentRequest this model
Send the exact ordering code, quantity or product list.